Back to all

Braking News: Keep Your Stopping Power

March 24, 2024

Richard Petty once told AutoNetTV, “You've gotta have good brakes. If you've got good brakes you can keep yourself out of a lotta trouble.”

That's why a regular brake inspection is on every Mustang driver's maintenance schedule. An inspection by your service advisor at Mustang Automotive will check your brake system and let you know if there are any problems.

Of course, if you're having trouble with your brakes, get your car into Mustang Automotive in Mustang right away. Here are some symptoms for Mustang drivers to watch for:

  • Low or spongy brake pedal
  • Hard brake pedal
  • A brake warning light that stays on
  • Constantly squealing or grinding brakes
  • Vibrations or clunking sounds when you apply your brakes

If you are experiencing any of these, it's time to get your brakes checked. Talk to your friendly and knowledgeable service advisor at Mustang Automotive .

There are two types of brakes: disc and drum. Disc brakes have a rotor that's attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle.

Drum brakes are most common on back wheels. Both types have pads or shoes that press against the brakes and slow the vehicle. Brake pads and shoes are made out of very tough material to withstand the heat and force generated when stopping your vehicle. Eventually, they wear out with use and become too thin and need to be replaced at Mustang Automotive. 

If the brake pads wear away completely, you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced. That's not only expensive but also dangerous because your vehicle won't stop as quickly. Sometimes rotors warp or crack and must be replaced.

A brake service at Mustang Automotive will also include a check of your brake fluid. When the brakes are applied, the pressure in the fluid activates the brake pads or shoes. Not enough fluid means not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. Mustang  drivers should change the brake fluid when their  vehicle manufacturer recommends to avoid these problems.

Come in to Mustang Automotive for an brake inspection before damage occurs. You can call ahead for an appointment by calling 405-745-4826.

Mustang Automotive
1600 E State Hwy 152
Mustang, Oklahoma 73064
405-745-4826
https://www.mustangautomotiveinc.com/

Need Service?

Request a Quote

More articles from Mustang Automotive

Tracking True in Mustang: Wheel Alignment

June 30, 2025

At Mustang Automotive, we occasionally see severe tire damage that could have been prevented with proper wheel alignment. During a Mustang Automotive alignment service, your vehicle is put on an alignment rack where the tires, steering and suspension parts are inspected for problems. Then the al... More

The Need for Speed (Wheel Speed Sensor Maintenance)

June 23, 2025

Today's vehicles have some pretty amazing technology in them, including a computerized braking system we all pretty much take for granted these days. Antilock brake systems (ABS) have been around for years but they help drivers stop in much shorter distances reliably than ever before. When you ... More

Breathe Easier (Cabin Air Filter)

June 16, 2025

When you get in your vehicle, how does it smell? If it's not so nice, it may be time to have your cabin air filter changed. It's not the same one that filters out the air used in the engine. The cabin air filter screens out dust and other particulates from the outside air so when it enters the c... More